Garmin International Inc A2401 Manuel D’Utilisation

Operating temperature 
range

From -20° to 45°C (from -4° to 113°F)

Charging temperature 
range

From 0° to 40°C (from 32° to 104°F)

Radio frequency and 
protocols

2.4 GHz ANT+; Bluetooth 4.0 (includes 
EDR and BLE)

Compass-safe distance

17.5 cm (7 in.)

*The device withstands incidental exposure to water of up to 1 m

for up to 30 min. For more information, go to 

.

• Go to 

information.

• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.

Select   to turn on the backlight.
The backlight turns on automatically when you select a 

button, and when alerts and messages are displayed.

Optional accessories, such as mounts, maps, fitness 

accessories, and replacement parts, are available at 

 or from your Garmin dealer.

The tempe is an ANT+ wireless temperature sensor. You can 

attach the sensor to a secure strap or loop where it is exposed 

to ambient air, and therefore, provides a consistent source of 

accurate temperature data. You must pair the tempe with your 

device to display temperature data from the tempe.

Bring the device within 10 ft. (3 m) of the ANT+ accessory.

Select Setup > Fitness.

Select Heart Rate Monitor or Bike Cadence Sensor.

Select Search For New.

Customize the data fields to view the heart rate or cadence 

).

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (32.9 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the ANT+

accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated. This

process occurs automatically when you turn on the Garmin

device and only takes a few seconds when the accessories

are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

If the device stops responding, you may need to reset it. This 

does not erase any of your data or settings.

Remove the batteries.

Reinstall the batteries.

You can view the unit ID, software version, regulatory 

information, and license agreement.

Select Setup > About.

You can reset all settings back to the factory default settings.

Select Setup > Reset > Reset All Settings > Yes.

Appendix

13

DRAFT