Davis Instruments DWW6800 Manuel D’Utilisation
7
Register your Gateway
Note:
Register your Gateway online and wait 5 to 10 minutes BEFORE you power it up to
avoid a delay in uploading data. If you already powered up before registering,
remove power from the Gateway, register, then repower.
avoid a delay in uploading data. If you already powered up before registering,
remove power from the Gateway, register, then repower.
1. When you receive the e-mail with the Activation Code, follow the instructions
in the e-mail. (Or, go to www.weatherlink.com; click on Register. Select the
Gateway option.)
Gateway option.)
2. Read and agree to the Terms of Use.
3. Enter the DID and KEY located on the
3. Enter the DID and KEY located on the
sticker on the cover of this manual and
on the sticker inside the Vantage
Connect shelter.
on the sticker inside the Vantage
Connect shelter.
4. Create and enter a user name and
password, and enter your e-mail
address to create a new user account.
address to create a new user account.
Note:
Your user name will become part of your web page’s URL. For example if your user
name is JohnSmith, your URL will be www.weatherlink.com/user/JohnSmith
name is JohnSmith, your URL will be www.weatherlink.com/user/JohnSmith
5. Enter your time zone and indicate your Daylight Saving Time preference.
6. Enter the Activation Code received in the e-mail.
7. Click Continue with Registration.
8. Agree to the Service Agreement.
9. Click Create Account.
6. Enter the Activation Code received in the e-mail.
7. Click Continue with Registration.
8. Agree to the Service Agreement.
9. Click Create Account.
Configure and Set Up Your Gateway
You will need to know the transmitter IDs of each transmitting station before you
configure your Vantage Connect.
Follow the prompts to enter setting and configuration:
1. Reporting Stations & Units of Measure
Follow the prompts to enter setting and configuration:
1. Reporting Stations & Units of Measure
•
Enter the transmitter ID number of each of the transmitters that will be report-
ing to your Vantage Connect (up to 8). Choose a station type for each. (For
example, Vantage Pro2 ID: 1, Leaf and Soil Moisture Station: ID 2.) If using
repeaters, check the “Enable Repeaters” box and choose the final repeater’s ID
letter for each transmitter using repeaters.
ing to your Vantage Connect (up to 8). Choose a station type for each. (For
example, Vantage Pro2 ID: 1, Leaf and Soil Moisture Station: ID 2.) If using
repeaters, check the “Enable Repeaters” box and choose the final repeater’s ID
letter for each transmitter using repeaters.
•
Choose your preferred units.
•
Click Save.
2. Device Settings
DID: 0012746AAS00
KEY: 123456