Fuji Xerox Co. Ltd. KBRF Manuel D’Utilisation

 

FUJI XEROX 

 

LEFX 

User’s Manual

 

 
This manual explains the installation process and a function and 
performance of Radio Frequency Identification system (LEFX). 
This product doesn't permit a repair and an exchange by the end user. 
Please contact our service office or a Fuji Xerox product handling Service 
Company when the exchange of the device is necessary due to the trouble 
and so on. 
Also, please read this manual to the end surely, and use a product properly 
before you install LEFX in your machine. 
 
 
 
 
 
 
 
 
 
 
 
 
 

FUJI XEROX CO., LTD. 

 
 
 

Introduction 

 
This product uses the radio wave of 125kHz. (Inductive Loop System) 
Therefore, this product takes a regulation and/or low such as output of the 
RF power by each country and/or self-governing body. 
Some cases, the final product (e.g. printer) adapts to the law of each 
country, and type approval may be required.   
 
 

The following shall be kept to use a product for the safety. 

 
A cable and TAG shall use designation accessories. 
A cable and TAG shall use designation accessories.   
 
Do not remodel and/or dismantle this product. 
Don't remodel this product because a Fire, Electric shock and Machine 
trouble may be caused. Because this product uses a radio wave, law of the 
country may punish so remodeling of the product. 
 
Remove a power supply soon if you notice smoke or unusual smell. 
Remove a power supply if you notice smoke or unusual smell, because it 
short-circuits, and a fire and an electric shock may be caused.