Fuji Xerox Co. Ltd. KBRF Manuel D’Utilisation
Don't put wiring and/or other articles on this product.
This product builds in the antenna which radiates the radio wave.
Performance may not be able to be maintained when the wire etc. is
installed on the product and so on.
Don't install this product in the place to have the possibility for a liquid
and other material fall.
You may be struck by electricity or product may short-circuit.
Don't give this product an electric static discharge
This product may be damaged by the static electricity which accumulated
in the human body and so on. Connect a human body to the ground at the
time of the maintenance or discharge before the work.
Product use environment is to keep the following.
Guarantee temperature: 0 to 55 degrees C (when working)
Storage temperature: 0∼35℃ 12months, -20∼0℃ 35∼45℃ 48Hours
Humidity: 15∼80%RH 12months, 5∼15%RH 80∼95%RH 48Hours
Rated input power: DC +5V +/- 5%, DC +3.3V +/- 5%
Storage temperature: 0∼35℃ 12months, -20∼0℃ 35∼45℃ 48Hours
Humidity: 15∼80%RH 12months, 5∼15%RH 80∼95%RH 48Hours
Rated input power: DC +5V +/- 5%, DC +3.3V +/- 5%
How to scrap this product
Make contact with Fuji Xerox or our company agency when you scrap this
product. Or, follow ordinances such as each country and a local government.
Please ask each country and a self-governing body about the information of
the regulations.
Make contact with Fuji Xerox or our company agency when you scrap this
product. Or, follow ordinances such as each country and a local government.
Please ask each country and a self-governing body about the information of
the regulations.
Notice about the law and the standard
CE 0682
This product applies the European NB certificate where it followed the
99/5/ EEC.
An applicable standard is as follows;
EN 300 330 V1.3.2
EN 301 489 -1 and EN 301 489 -2
99/5/ EEC.
An applicable standard is as follows;
EN 300 330 V1.3.2
EN 301 489 -1 and EN 301 489 -2
FCC ID: J2LKBRF, IC:xxxxxx-xxxx
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This product acquires the certification or approval of the wireless module.
However, a product (e.g. printer) that contains this module must apply the
various standards required to the product.
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This product acquires the certification or approval of the wireless module.
However, a product (e.g. printer) that contains this module must apply the
various standards required to the product.