Fuji Xerox Co. Ltd. RFGIFX Manuel D’Utilisation

Page de 5
Don't put wiring and/or other articles on this product. 
This  product  builds  in  the  antenna  which  radiates  the  radio  wave. 
Performance  may  not  be  able  to  be  maintained  when  the  wire  etc.  is 
installed on the product and so on. 
 
Don't install this product in the place to have the possibility for a liquid 
and other material fall. 
You may be struck by electricity or product may short-circuit. 
 
Don't give this product an electric static discharge 
This product may be damaged by the static electricity which accumulated 
in the human body and so on. Connect a human body to the ground at the 
time of the maintenance or discharge before the work. 
 
Product use environment is to keep the following. 
Guarantee temperature: 0 to 55 degrees C (when working) 
Storage temperature: 0∼35℃  12months, -20∼0℃  35∼45℃  48Hours 
Humidity: 15∼80%RH 12months, 5∼15%RH 80∼95%RH    48Hours 
Rated input power: DC +5V +/- 5%, DC +3.3V +/- 5% 
 
How to scrap this product 
Make contact with Fuji Xerox or our company agency when you scrap this 
product. Or, follow ordinances such as each country and a local government. 
Please ask each country and a self-governing body about the information of 
the regulations. 
 
 
 
 
Notice about the law and the standard 
 
 
CE 0682 
This  product  applies  the  European  NB  certificate  where  it  followed  the 
99/5/ EEC. 
An applicable standard is as follows; 
  EN 300 330 V1.3.2 
  EN 301 489 -1 and EN 301 489 -2 
 
FCC ID: J2LRFGIFX, IC:xxxxxx-xxxx 
This device complies with Part 15 of the FCC Rules. Operation is subject to 
the  following  two  conditions:  (1)  this  device  may  not  cause  harmful 
interference,  and  (2)  this  device  must  accept  any  interference  received, 
including interference that may cause undesired operation. 
 
 
 
 
 
 
 
 
This product acquires the certification or approval of the wireless module. 
However, a product (e.g. printer) that contains this module must apply the 
various standards required to the product.