Fuji Xerox Co. Ltd. RFGIFX Manuel D’Utilisation
Outline of the product
Summary
GIFX Unit System is RFID (Radio Frequency Identification) device for an
Inductive loop coupling. This system has two modules of the Reader/Writer
(GIFX-C) and Tag (GIFX-T).
-
GIFX generates a 125kHz signal on an internal looped antenna.
-
Transmitted data are modulated using Amplitude Shift Keying (FSK)
modulation.
modulation.
-
Received data are demodulated from the Tag load variation signal,
generated on the antenna.
generated on the antenna.
-
Tag is battery less memory with a looped antenna.
-
Communication distance between GIFX-C and GIFX-T is 4mm to
13mm.
13mm.
Block diagram of the product
System Requirement
The following condition shall be kept, that use GIFX unit system.
-
GIFX-C must be used with the GIFX-T.
-
GIFX must be internally installed in machine. (Printer)
-
Supply DC Voltage must be 5V+/- 10% and 3.3V +/- 10%.
-
The certification label and/or the notice of the manual may be
necessary for the final product enclosure, which contains this unit.
necessary for the final product enclosure, which contains this unit.
-
Do not make the radiation time of the radio wave continue for more
than one second.
than one second.
Specifications
The specifications of the product are as the following;
-
Carrier Frequency: 125kHz +/- 200ppm
-
Modulation: FSK
-
Communication distance: 4mm to 13mm
(It means the distance of the Reader Writer Module ANT and Tag
Module ANT.)
(It means the distance of the Reader Writer Module ANT and Tag
Module ANT.)
-
Supply Voltage: DC 5V +/- 10%
-
Rated current: 160mA
-
Signal Level: TTL (3.3V)
-
Operating temperature: +5 to +32degrees C
-
Maximum RF power: 14.12mW (Fixed for maximum power)