SMC Networks SMCKF01Z Manuel D’Utilisation

If a key fob does not appear to be working properly or is not 

being located by the TouchScreen during the Add process: 

¾

 

Verify that a new battery has been properly installed 

(see step 1, “ Pre-Installation Guidelines.” 

¾

 

Confirm that the key fob has been defaulted. 

 

With your key fob, you can arm your system (in Arm Away or 

Arm Stay modes), disarm it, or send an Emergency alarm for 
police assistance.  

When a key fob button is pressed, the LED flashes 

red once to show it has contacted the TouchScreen. If the 

key fob is out of range of the TouchScreen, the LED flashes 
red three times quickly. 

 

 

System Status 

 
Press the System Status button 1.5 seconds to light the LED 

and show the current status of the security system. 

The LED flashes red once to show it has contacted the 

system and then: 

¾

 

Lights green for 3 seconds if the system is disarmed. 

¾

 

Lights red for 3 seconds if the system is armed. 

¾

 

Lights orange for 3 seconds if the system is not ready to 

be armed (for example, if a door is open). 

¾

 

Flashes 3 times every 5 seconds if the key fob has been 
defaulted and is ready to pair to the TouchScreen. 

 

Arm Away 

 
Press the Arm Away button 1.5 seconds to arm the system in 

Arm Away mode (no one is in the premises). For information 
about arming mode, refer to the TouchScreen User Guide. 

The LED flashes red once to show it has contacted the 
system, then lights red for 1 second. The Exit Delay starts 

(default 30 seconds—TouchScreen beeps during this period). 

If the system is not ready for arming, such as when a door or 

window is open, the LED flashes orange 7 times. 

 

 

Arm Stay 

 
Press the Arm Stay button 1.5 seconds to arm the system in 

Arm Stay mode (people are in the premises). For information 
about arming mode, refer to the TouchScreen User Guide. 

The LED flashes red once to show it has contacted the 
system, then lights red for 1 second. The Exit Delay starts—

twice as long as the period configured for Arm Away (up to 
120 seconds, with no beeping from the TouchScreen). 

If the system is not ready for arming, such as when a door or 
window is open, the LED flashes orange 7 times. 

  Disarm 

 

Press the Disarm button for 1.5 seconds to disarm the system 
without entering the premises. 

The LED flashes green once to show it has contacted the 
system, then lights green for 1 second. The Exit Delay 

starts—twice as long as the period configured for Arm Away 
(up to 120 seconds, with no beeping from the TouchScreen). 

 

 

Panic 

 

Press the Panic button for about 2.25 seconds to send a 
silent alarm to central monitoring for police assistance. The 
TouchScreen does not react in any way; however, the 

History tab on the Security widget shows an alarm was sent. 
Also, contact persons will receive email and SMS 

notifications if they are configured to do so. 

The LED flashes red once to show it has contacted the 

system, then flashes red 7 times.  

 

Arming Red 

Disarming Green 

System Not Ready to Arm 

Orange