EON Corporation E1000V Manuel D’Utilisation
EON Corporation 2003
EON VIU User Installation Guide
The EON Vending Information Unit (VIU) comes fully assembled and ready for
operation. The user only needs to attach the unit to the interior of the vending machine
per the instructions below. No programming or adjustments to the unit are required from
the user.
Elements of the fully assembled VIU include:
Housing
The modem is packaged in a labeled metal box. There are four LEDs, a password store
button, serial connector, and DEX input, visible from the outside. There is a power cable
that connects to the vending machine's outlet, so no cutting or splicing for installation is
required.
Radio
Attached to the housing is a fixed frequency fm radio transmitter. The radio is connected
to the controller board via a serial cable. The radio has a male bnc connector mounted
aside the serial connector to allow connection to the antenna.
Power Adapter
Powering the unit is a UL approved DC power adapter. The adapter's output rating is
+12VDC/1.25A. The adapter's input rating is 100~120V~: 60Hz, 0.45A. The unit plugs
directly into the housing.
Antenna
The antenna is a 50-Ohm, "whip" style, ¾ wave, with a bnc connector.
Connections
The Dex cable has connectors for Dex ports on both the VIU housing and the vending
machine.
VIU Installation:
Connect the Dex cable to its respective ports in both the vending machine and VIU
housing.
Firmly attach the housing unit to a secure location inside the vending machine using the
heavy-duty adhesive Velcro strip.