EON Corporation E1000V Manuale Utente

 

 

EON Corporation 2003 

 
The EON Vending Information Unit (VIU) comes fully assembled and ready for 
operation. The user only needs to attach the unit to the interior of the vending machine 
per the instructions below. No programming or adjustments to the unit are required from 
the user.   
 
Elements of the fully assembled VIU include: 
 
Housing 
 
The modem is packaged in a labeled metal box.  There are four LEDs, a password store 
button, serial connector, and DEX input, visible from the outside.  There is a power cable 
that connects to the vending machine's outlet, so no cutting or splicing for installation is 
required.   
 
Radio 
 
Attached to the housing is a fixed frequency fm radio transmitter.  The radio is connected 
to the controller board via a serial cable.  The radio has a male bnc connector mounted 
aside the serial connector to allow connection to the antenna. 
 
Power Adapter 
 
Powering the unit is a UL approved DC power adapter.  The adapter's output rating is 
+12VDC/1.25A.  The adapter's input rating is 100~120V~: 60Hz, 0.45A.  The unit plugs 
directly into the housing. 
 
Antenna 
 
The antenna is a 50-Ohm, "whip" style, ¾ wave, with a bnc connector.   
 
Connections 
 
The Dex cable has connectors for Dex ports on both the VIU housing and the vending 
machine.   
 
VIU Installation: 
 
Connect the Dex cable to its respective ports in both the vending machine and VIU 
housing.  
 
Firmly attach the housing unit to a secure location inside the vending machine using the 
heavy-duty adhesive Velcro strip.