Zebex Industries Inc BTS-325X Manuel D’Utilisation

 

Handy Wireless Scanner 

19 

Start Of Configuration 

The scanner connects to the host via wireless connection. You may select SPP Master or 
SPP Slave for PC connection or select HID mode and Smart phone mode for smart phone 
connection. 
 
SPP Slave Mode 
In this mode, the scanner connects to the host /PC via wireless connection and performs 
like there’s a serial connection. In SPP Slave mode, the scanner is discoverable from a 
remote device and it can request the scanner for connection. There are several ways to 
connect the wireless scanner to your PC. If you have your own applications please check 
their User’s Manuals for pairing instructions. 
 
To connect a wireless device to Window based system for the first time: 

1. 

Turn on the host computer and activate its wireless connection.   

2. 

Select “Add Bluetooth device”. Or open the dialog Bluetooth devices and click 
“Add”. 

3. 

Power on the scanner and program it with “SPP Slave mode” label. 

Scanner SPP Slave enable 

Enable wireless SPP Slave mode. 

4. 

On Devices tab, click Add. This will open the Add Bluetooth Device Wizard.   

5. 

Select the "My device is set up and ready to be found" checkbox, and then 
click Next.   

6. 

The scanner should be on the list of discoverable devices. The default name 
of the scanner is “Z-325X BT”. Select “Z-325X BT” and click “Next”.   

7. 

Select “Let me choose my own passkey” and enter the pin code. The default 
pin code is “12345678.   

8. 

Click “Next” to connect the scanner to the host. A short beep should be 
heard upon connection. 

End Of Configuration