Zebex Industries Inc BTS-325X Manuel D’Utilisation

 

Handy Wireless Scanner 

21 

Start Of Configuration 

 
HID mode 
In HID mode, the scanner connects to the host /PC via wireless connection and performs 
like there’s a keyboard connection. The scanner initiates the connection to the remote 

device. 

1. 

Power on the scanner and program it with “HID Mode”. To connect a smart 
mobile phone (for example, iPhone, Android), the Smart phone mode must 

also be enabled. Power off the scanner when the setting is done. 

 

HID mode 

Enable wireless HID keyboard emulation 

 

Smart phone mode

For smart phone mode (HID MODE must also be 
enabled). 

2. 

Enable wireless connection on your host and follow the instructions in your 

host to set it to discover other wireless devices in its surrounding. 

3. 

The scanner should be on the list of discoverable devices. The default name 
of the scanner is “Z-325X BT”. You will be prompt to enter paring pin code. 
Select “Z-325X BT” and input the pin code that appears on your mobile 
device to connect scanner to the phone.   

4. 

Scan the Enter barcode to confirm. A short beep should be heard upon 
connection. 

 

 

Enter 
Full ASCII ---CR 
Function key-----“Enetr(num.)” 

 
 
 
 
 
 
 
 
 
 
 
 

End Of Configuration