HID Global Corporation 5553 Manuel D’Utilisation
HF Multi ISO RFID Reader User Manual, Firmware V1.4
1508-USM-00-0-04
2.2.4.6
Single Shot (default 0)
If Single Shot is set, the reader displays the serial number of a tag in continuous read mode once
within a specified time-out. The time-out is defined at EEPROM register 0Fh.
within a specified time-out. The time-out is defined at EEPROM register 0Fh.
The delay time can be adjusted stepwise in 100ms steps. 00h indicates no delay and FFh
indicates infinite delay.
indicates infinite delay.
Note: The delay precision depends on reset off and reset recovery time.
2.2.4.7
Extended Protocol (default 1)
If Extended Protocol is set, the transfer data telegram command supports ISO14443-4 and
automatically process the WTX and chaining for smaller frames. This flag has to be set to enable
14443-4 error handling – see Extended Protocol (default 1), page 27.
automatically process the WTX and chaining for smaller frames. This flag has to be set to enable
14443-4 error handling – see Extended Protocol (default 1), page 27.
If sending ISO 14443-3 commands this flag has to be switched off.
The transfer data telegram command is only supported in normal mode, not in transmit / receive
mode.
mode.
2.2.4.8
Extend ID (default 0)
If the Extend ID is set, the reader extends the serial number with additional information.
ISO 14443 A tags
Tag type / ReqA
Serial number
[SAK]
1 byte / 2 bytes
4 / 7 / 10 bytes
1 byte
Tag type / ReqA
Serial number
[SAK]
ATS
Used Speed
[CID]
1 byte / 2 bytes
4 / 7 / 10 bytes
1 byte
n bytes
1 byte
1 byte
The tag type byte indicates the type of cascade level.
Tag type
Description
00h
Cascade level 1 transponder
01h
Cascade level 2 transponder
02h
Cascade level 3 transponder
ISO 14443 B tags
Serial number
Application data
Protocol info
MBLI/CID
4 bytes
4 bytes
3 bytes
1 byte
Serial number
Application data
Protocol info MBLI / CID Used Speed [CID]
4 bytes
4 bytes
3 bytes
1 byte
1 byte
1 byte
For detailed description of Application Data, Protocol Info and MBLI/CID, refer to the ISO 14443
documentation [1].
documentation [1].
August 2010
Page 27 of 144
© 2005-2010 HID Global Corporation. All rights reserved.