HID Global Corporation X001800C Manuel D’Utilisation

© 

2010 

HID 

Global 

Corporation 

 

       All 

rights 

reserved 

 

Both the DTC4500 use the Button messages rather than the Display Message system.  

5 Press 

the 

ON/Off button when Printer is in an error state to cause the action to 

be cancelled. (Note:  If no other error occurs, then the Pause button will 
illuminate its blue LED.) 

 

6 

Press the Pause button when Printer is in an error state to cause the Printer to 
retry. (Note: It will illuminate its blue LED and retry the failed action.)

 

7 

When downloading an upgrade file, both blue LED’s will blink. If the unit is a 
DTC1000: 

•  You have been advised that the upgrade is in process.  

8 

If a language (other then English) is currently selected:  

• 

You can press and hold the Pause button during the power-up sequence to 
change the language back to English. 

 

9 

When no LCD Display is available, press or hold the buttons to access certain 
Internal Test jobs. See below.  

•  To print a card with the Printer Settings, press the Pause button and hold for 

4+ seconds when the Printer is ready and idle.  

• 

To print the alignment or the Self Test, press the ON/OFF button then 
immediately press the Pause button. 

 

DTC4500 Card Printer/Encoder User Guide

 

79