Teledesign Systems Inc TS4000EH Manuel D’Utilisation
TS4000 Radio Modem User’s Manual
Serial Port
18
Selection Description
Enable Serial Port 2
for Data
This enables serial port 2 for transmitting and receiving
data. This does not effect using serial port 2 for
configuration and remote diagnostics. Serial port 2 can
only be used in packet mode (transparent mode is not
available).
data. This does not effect using serial port 2 for
configuration and remote diagnostics. Serial port 2 can
only be used in packet mode (transparent mode is not
available).
i) This function is an extra cost firmware option. Please
contact Teledesign for information on purchasing and
enabling this option.
contact Teledesign for information on purchasing and
enabling this option.
ii) This feature requires firmware version 6.00 or higher.
iii) This feature also requires that Enable Packet
Operation on the Packet General tab to be checked.
Operation on the Packet General tab to be checked.
Available for
Configuration
Configuration
This option box cannot be set by the user.
When this is checked it indicates the firmware is a
version (5.00 or higher) that supports the use of Serial
port 2 for configuration of the modem, control of the
modem operation and for diagnostics.
version (5.00 or higher) that supports the use of Serial
port 2 for configuration of the modem, control of the
modem operation and for diagnostics.
Serial Port 2
Serial Port 2 Enable