Manuels d'utilisation pour Teledesign Systems Inc TS4000EH

Table des matières

• Copyright

  2
• Disclaimer

  2
• Emissions

  3
  • FCC

    3
    • Part 15

      3
    • Part 90

      3
    • Industry Canada

      3
      • ICES-003

        3
      • RSS-119

        3
  • Notice

    3
  • Safety Warning

    3
  • RF Exposure

    3
• Table of Contents

  4
• TS4000 Overview

  7
  • Introduction

    7
  • Features

    7
  • Connections

    9
    • Serial Port

      9
      • Signal Levels

        9
      • Standard Case

        9
    • Antenna Connector

      9
    • Power Connection

      9
      • Switching Regulator

        9
      • Power Supply Current

        9
        • Example

          9
          • Standard Case

            9
            • Fuses

              10
  • Mounting

    10
  • Configuring the TS4000

    10
  • AirTest - Data Testing

    10
  • Upgrading the TS4000 Firmware

    10
  • AirScan

    10
  • Remote Diagnostics

    10
  • AirCalc - Range Estimation

    11
  • Status Lights

    12
• Configuration Program

  13
  • Using Help

    13
  • System Requirements

    13
  • Installation

    13
  • TS4000 to PC Connection

    13
    • Software Connection

      13
  • Programming and Retrieving Configurations

    14
  • Storing Configurations

    14
  • Diagnostics

    15
    • Diagnostics Screen

      15
    • Modem Hardware Screen

      16
    • Radio Hardware Screen

      16
• Serial Port

  17
  • RS-232 Serial Port Basics

    17
    • Connectors

      17
    • DCE vs. DTE

      17
    • Asynchronous Data

      17
    • Flow Control

      17
      • Hardware Flow Control

        17
      • Software Flow Control

        18
  • Serial Port Connector

    18
  • Signal Levels

    18
    • Serial Port 1

      18
    • Serial Port 2

      18
    • RS-485

      18
  • Signal Options

    18
    • RI Pin Signal Options

      19
      • RI for Modem Power

        19
      • RI Connected for DSR

        19
    • DSR Pin Signal Options

      19
      • DSR Always High

        19
    • DTR Pin Signal Options

      19
      • DTR for Modem Power

        19
  • Configuration Options – Serial Port 1

    20
    • Baud Rate List

      20
    • Data Bits

      20
    • Parity

      20
    • Transmit Data Protocol

      20
    • RTS Control of Sleep Mode

      21
    • Wait For Complete Burst Before Beginning Transmission

      21
    • Receive Data Protocol

      22
    • DCD Line Control

      22
    • CTS Line Control

      23
    • DSR Line Control

      23
  • Serial Port 2

    24
    • Serial Port 2 Enable

      24
    • Baud Rate List

      25
    • Data Bits

      25
    • Parity

      25
    • Transmit Data Protocol

      25
    • Receive Data Protocol – Idle Time Between Bursts

      25
    • DCD Line Control – Active when Radio Carrier Detected

      25
    • CTS Line Control – Active when Transmitting

      26
    • DSR Line Control – Active when Operational

      26
• Radio Setup

  27
  • Configuration Options

    27
    • Modulation

      27
    • Receive Carrier Detect Level

      28
    • Automatic Station ID

      28
    • Frequency Channel at Power Up

      28
    • Clear Channel Scan

      29
    • Redundancy

      29
      • Sleep

        30
      • Coding (FEC)

        30
      • Data Scramble Code

        30
      • Force Transmit Over Receive

        31
      • Transmit Timeout Timer

        31
      • Transmit Only Operation

        31
      • Receive Only Operation

        31
      • Transmit Power

        31
      • Additional Transmit Attack Time

        31
  • Frequency Programming

    32
    • Methods of Programming Channels

      32
      • 1) Frequency Programming for Authorized Organizations

        32
      • 2) Frequency Cloning

        32
      • 3) Preprogrammed Frequency File

        32
    • Frequency Configuration Screen

      33
      • Radio vs. File Settings

        33
  • Channel Switching

    34
    • Channel Change with a Control String

      34
      • Determining the Active Channel

        34
      • Invalid Channel Selection

        34
      • Channel at Power Up

        34
  • Compatibility

    35
    • Enable

      35
    • Data Protocol

      35
    • Data Polarity

      36
    • Trimble Options - Mode

      36
    • Trimble Options – Channel Spacing

      36
    • Trimble Options – Store and Forward Repeaters

      36
• AirNet Packet Protocol

  37
  • Overview

    37
    • Packet Basics

      37
    • Addressability

      37
    • Acknowledgment and Retries

      37
    • Channel Access

      37
    • Store and Forward Repeater

      37
    • Features

      38
  • Configuration Options

    39
    • Packet General

      39
      • Packet Activate

        39
      • Medium (Channel) Access Control (MAC)

        39
      • CSMA MAC Setup

        40
      • Repeater Filtering

        40
      • Addresses

        40
      • Repeater Address List

        40
    • Packet for Port 1 / Packet for Port 2

      42
      • Modem Address

        42
      • Multicast Group Reception

        43
      • Packet Operation

        43
      • Default Transfer

        44
      • Default Destination Address

        44
      • Packet Status Data

        45
      • CSMA MAC Setup

        45
  • Control and Status Strings

    46
    • Control Strings

      46
    • Status Strings

      47
  • Master-Slave System Setup

    48
    • Setting Packet Timeout

      48
      • Example

        48
    • Data Packet Transmit Time

      49
      • Example

        49
  • Polled System with Store and Forward Repeaters

    50
    • Single Repeater System

      51
      • All Units

        51
      • Base Site

        51
      • Repeater Site

        51
    • Dual Repeater System

      53
      • All Units

        53
      • Base Site

        53
      • Repeater A Site

        53
      • Repeater B Site

        53
    • Three Repeater System

      55
      • All Units

        55
      • Base Site

        55
      • Repeater A Site

        55
      • Repeater B Site

        56
      • Repeater C Site

        56
    • Chain Repeater System

      58
      • All Units

        58
      • Base Site

        58
      • Repeater A Site

        58
      • Repeater B Site

        59
      • Repeater C Site

        59
      • Repeater D Site

        59
    • Other System Topologies

      60
  • CSMA System Setup

    61
    • Basic System - Setup Summary

      61
      • Slot Time

        61
      • Min Idle Slots

        61
      • Tx Index

        61
      • Packet Timeout

        62
    • System with Repeaters - Setup Summary

      62
      • Slot Time

        62
      • Min Idle Slots

        62
      • Tx Index

        62
      • Packet Timeout

        63
    • Setting Slot Time

      64
    • Setting Min Idle Slots

      64
      • Systems without Repeaters

        64
      • Systems with Repeaters

        64
        • Min Idle Slots

          64
        • Tx Index

          65
    • Setting Tx Index

      65
      • Example

        66
    • Setting Packet Timeout

      67
      • Systems without Repeaters

        67
      • Systems with Repeaters

        67
    • Data Packet Delay

      68
      • Average Delay

        68
      • Example

        69
      • Probable Delay

        69
      • Example

        69
• GPS Configuration

  70
  • Configuration Options

    70
    • Function

      70
    • Baud Rate List

      70
    • Data Bits

      71
    • Parity

      71
    • Radio Operation

      71
    • Frequency Channel at Power Up

      71
    • Transmit Power

      71
    • Automatic Station ID

      72
    • Receive Carrier Detect Level

      72
    • Trimble Compatible

      72
• Testing

  73
  • AirTest

    73
    • Data Test

      73
    • BER Test

      74
  • AirScan

    75
    • AirScan Controls

      75
      • Display

        75
      • Center Frequency

        75
      • Frequency Span

        75
• Remote Diagnostics

  76
  • Remote Diagnostics with Repeaters

    76
    • Remote Diagnostics Screen

      76
    • Remote Diagnostic Controls

      76
      • Serial Port

        76
      • Retrieve Local Diagnostics

        77
      • Address

        77
      • Retrieve Remote Diagnostics from One Unit

        77
      • Retrieve Remote Diagnostics from All Units in List

        77
      • Maximum Response Time

        77
      • Continuous Polling

        77
      • Clear Successes/Attempts

        77
      • Diagnostics List

        77
    • Remote Diagnostics Request and Response Strings

      78
• Upgrading Firmware

  79
  • Upgrading

    79
• Licensing

  80
  • User’s License

    80
    • USA (FCC)

      80
      • Licensing Service Companies

        80
      • Other Contacts

        81
    • International

      81
  • Manufacturer’s Certification

    81
    • USA (FCC)

      81
      • Part 15

        81
      • Part 90

        81
    • Industry Canada

      81
      • ICES-003

        81
      • RSS-119

        81
    • International

      81
• Service and Support

  82
  • Contacting Teledesign

    82
  • Returning Equipment

    82
• Warranty

  83
  • Two Year Warranty

    83
  • Exclusions

    83
  • Limitations

    83
• Appendix A - Serial Ports

  84
  • Standard Case

    84
    • Serial Port 1 Pinout

      84
    • Serial Port 2 Pinout

      84
  • Watertight Case

    84
    • Pinout

      84
      • Notes

        85
  • Standard RS-232 Serial Port Pinout

    86
  • Standard Usage of the RS-232 Control Signals

    86
  • Signal Levels

    87
    • RS-232 Signal Levels

      87
    • TTL Signal Levels

      87
    • Signal Polarity

      87
• Appendix B – ASCII Character Set

  88
• Appendix C – Control and Status Strings

  89
  • General Strings

    89
    • General Control Strings

      89
    • Message Status Strings

      89
    • Frequency Control Strings

      89
    • Modem Configuration Strings

      89
    • Packet Strings

      90
      • Packet Control Strings

        90
      • Packet Status Strings

        91
    • Diagnostics Strings

      92
      • Diagnostics Request Strings

        92
      • Local Diagnostics Response Structure

        92
      • Remote Diagnostics Response Structure

        93
• Appendix D – Internal Jumper Block

  95
  • Factory Default Jumper Settings

    95
    • Instructions for Accessing the Jumpers

      95
    • Jumper Settings for Power on Serial Port 1 - Pin 9

      96
    • Jumper Settings for Power on Serial Port 1 - Pin 4

      96
    • Jumper Settings for Power on Serial Port 2 - Pin 9

      97
    • Jumper Settings for TTL Levels on Serial Port 1

      97