Teledesign Systems Inc TS4000EH Manuel D’Utilisation
TS4000 Radio Modem User’s Manual
Radio Setup
26
The TS4000 comes in various frequency bands (i.e. 450 to 470 MHz) and can be
programmed for any valid channel within a given frequency band. The TS4000
can be set for up to 99 channels. A channel consists of a receive frequency and
a transmit frequency which can be set to the same or different frequencies.
Frequency channels are programmed into the TS4000 using the configuration
program. To access the frequency program screen press the Frequency
Configuration button on the main screen of the configuration program.
Frequency channel configuration settings are programmed into and retrieved
from the TS4000 the same as the modem configuration settings. There are three
ways to program frequencies into the TS4000 - cloning, using a preprogrammed
file and being an authorized service organization.
The FCC rules state that only authorized organizations should be allowed to
arbitrarily change the frequencies programmed into radio devices. Because of
this, a software enable code is required to enable the arbitrary frequency
programming capability of the TS4000 configuration program. Note that this
enable code is not required to retrieve and display the channel frequencies
programmed in the TS4000.
Contact Teledesign Systems to find the nearest authorized service center.
Cloning is copying the channels from one unit into another unit. Cloning can be
done by any user and does not require a software enable code. Cloning is
accomplished by first retrieving the desired frequency configuration from a unit.
This retrieved file can then be used to program another unit. Note that if the
retrieved frequency file is changed it can no longer be used to program another
unit.
Frequency programming can also be accomplished using a preprogrammed
frequency file. Preprogrammed frequency files must be obtained from
Teledesign. To use the preprogrammed file, first open the file with the frequency
configuration program, then program the TS4000 with the opened file.
Frequency
Programming
Programming
Methods of
Programming
Channels
Programming
Channels
1) Frequency
Programming for
Authorized Organizations
2) Frequency Cloning
3) Preprogrammed
Frequency File