Teledesign Systems Inc TS4000EH Manuel D’Utilisation

Page de 97
 
TS4000 Radio Modem User’s Manual  
TS4000 Overview 
 
TS4000 Overview 
 
The TS4000 Radio Modem is an integrated radio and modem designed for the 
wireless transmission of digital data.  The TS4000 can transfer data at rates up 
to 12,600 bits per second.  The TS4000 includes a synthesized VHF or UHF 
transceiver that can be programmed for up to 99 channels.   
 
This product is ideally suited to OEMs and system integrators who require a 
versatile radio modem in a single package.  The TS4000 is configured with 
windows based PC configuration software. 
 
 
Main Features 
„ 
High speed channel rates up to 12,600 bits per second. 
„ 
Selectable operating modes for transparent and packet data operation. 
„ 
High efficiency switching voltage regulator provides a wide input voltage 
range and uses minimum power regardless of the input voltage. 
„ 
Provides addressed communications for devices that are not directly 
addressable themselves. 
„ 
Includes store-and-forward data repeating for wide area coverage. 
„ 
Provides two individually configurable data ports. 
„ 
Supports data activation (three wire) and RTS/CTS handshake protocols. 
„ 
Configurable RF output power levels. 
„ 
Programmable receive sensitivity level (squelch) for use on noisy channels. 
„ 
Watertight case option for outdoor use and marine installations. 
„ 
Clear Channel Scan - The TS4000 will automatically and dynamically select 
the best channel for communication without intervention from the host 
equipment. 
„ 
Automatic CW Station ID - The TS4000 can be configured to periodically 
transmit a Morse code station ID. 
„ 
Remote Diagnostics allows the status of remote TS4000s to be checked 
over the air. 
 
Flexible Data Interface 
„ 
Two highly configurable user data serial ports. 
„ 
Serial ports support connection to virtually any asynchronous user device. 
„ 
Full handshake and data activation modes supported on serial port 1. 
„ 
Data activation mode requires only receive and transmit data lines for full 
communication with user device. 
„ 
Data rates from 1200 to 38,400 baud. 
„ 
RS-232, RS-485 or TTL signal levels. 
„ 
Using Serial Port 2 for data is a firmware upgrade option which is available 
for all TS4000s.  Contact Teledesign for pricing. 
 
Integrated RF Transceiver 
„ 
Synthesized transceivers cover VHF and UHF bands. 
„ 
Programmable RF output power levels. 
„ 
Channel frequencies are stored in internal flash memory and are selectable 
on-the-fly using simple ASCII command strings. 
 
Selectable Channel Protocols 
„ 
User selectable scrambling codes for private network communications. 
„ 
Optional Forward Error Correction (FEC) using block coding and interleaving 
corrects channel induced errors. 
„ 
User selectable transparent or AirNet packet data transfer modes. 
 
Introduction 
Features