Titan Electronics Inc NETCOM423 Manuel D’Utilisation
In the »Add Standard TCP/IP Port« Wizard just click the “Next” button,
and have the NetCom serial Device Server properly configured for
LPD-operation.
and have the NetCom serial Device Server properly configured for
LPD-operation.
8.2.3.1.2.
Name the new Printer Port
Then the properties of the new printer port must be entered. You need
the network address of the NetCom, this may be the IP Address or a
DNS name for the device. The port name is only for internal
identification in Windows. It will be listed in the possible ports to
the network address of the NetCom, this may be the IP Address or a
DNS name for the device. The port name is only for internal
identification in Windows. It will be listed in the possible ports to
connect printers to. The name is similar to »LPT1:« or »Com3:«, but it
does not denote any real hardware in your computer. You are free to
enter any name not used so far. The name is not related to the
LPD Queue name on the NetCom. Again click the “Next” button.
does not denote any real hardware in your computer. You are free to
enter any name not used so far. The name is not related to the
LPD Queue name on the NetCom. Again click the “Next” button.
Image 124: Properties of Print Server Port
8.2.3.1.3.
Configure the Printer Port
As the last step in creating the printer port for your printer you need to
enter some additional information. As the »Device Type« select
“Custom”, and open the “Settings …”.
enter some additional information. As the »Device Type« select
“Custom”, and open the “Settings …”.
Page
101
NetCom 123 WLAN, 423 WLAN,