Titan Electronics Inc NETCOM423 Manuel D’Utilisation
Image 125: Properties of Print Server Port
Under »Port Settings« select the “LPR” protocol instead of the “Raw”
method. The Port Number becomes unavailable, because the standard
TCP Port 515 is used in this configuration. Enter the Queue name you
configured in the NetCom. Each serial port on a NetCom has a separate
Queue name to identify it. So it may be a good idea to name the queue
after the printer attached to the serial port. Be sure to enable the “Byte
Counting”, because this is required by the Print Server function in the
NetCom. Close these options with the “OK” button.
method. The Port Number becomes unavailable, because the standard
TCP Port 515 is used in this configuration. Enter the Queue name you
configured in the NetCom. Each serial port on a NetCom has a separate
Queue name to identify it. So it may be a good idea to name the queue
after the printer attached to the serial port. Be sure to enable the “Byte
Counting”, because this is required by the Print Server function in the
NetCom. Close these options with the “OK” button.
8.2.3.1.4.
Install Printer Driver
Now the printer port is installed, and the Printer installation Wizard
continues. Select the printer from the list, or install a new type using an
installation disk the usual way.
8.2.3.2.
continues. Select the printer from the list, or install a new type using an
installation disk the usual way.
8.2.3.2.
Modify an Existing Printer
In several situations it is necessary to modify the configuration of a
printer, which is already installed in Windows. For example, the mode
of use shall be changed to Printer Server Mode, the printer is moved
from a local serial port to a NetCom Serial Device Server, or the
installation program of the printer only accepts local serial ports to
attach the printer to. In such situations it is required to create a new lpd
port, and modify the configuration of the printer.
printer, which is already installed in Windows. For example, the mode
of use shall be changed to Printer Server Mode, the printer is moved
from a local serial port to a NetCom Serial Device Server, or the
installation program of the printer only accepts local serial ports to
attach the printer to. In such situations it is required to create a new lpd
port, and modify the configuration of the printer.
823RM WLAN, 1623RM WLAN
Page
102