Titan Electronics Inc NETCOM423 Manuel D’Utilisation
5.1.3.1. Ping
Enter the IP-Address or the name of a station
in the field, and click the “Ping” button. The
network connection is checked by sending
certain ICMP data packages.
in the field, and click the “Ping” button. The
network connection is checked by sending
certain ICMP data packages.
Image 38: Web Panel Ping
Page
39
NetCom 123 WLAN, 423 WLAN,
If the target responds, the network between the NetCom and the target
is operational. The time required for an echo depends on the speed of
the network. In a typical Ethernet this is only very few Milliseconds,
while it can be several seconds throughout the Internet.
is operational. The time required for an echo depends on the speed of
the network. In a typical Ethernet this is only very few Milliseconds,
while it can be several seconds throughout the Internet.
PING 127.0.0.1 from 192.168.1.87 : 44 (72) bytes of data
52 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1.560 msec
52 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1.542 msec
52 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1.542 msec
52 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1.542 msec
52 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1.542 msec
back
5.1.3.2. Statistics
Select the serial port to see its statistical
information.
information.
Image 39: Web Panel Statistics
Port Selection
The statistics window reports the state of the
modem status and control signals. Also the
number of state changes. The number of
characters sent and received is shown at the
bottom.
modem status and control signals. Also the
number of state changes. The number of
characters sent and received is shown at the
bottom.
Image 40: Web Panel Port
Statistics