Belkin International Inc. F5D6231-4 Manuel D’Utilisation

If “Obtain an IP address automatically” and “Obtain DNS server address 
automatically” are already selected, your computer is already configured for DHCP. 
Click “Cancel” to close each window, and skip to Step 2 “Disable HTTP Proxy.”

6.

Select “Obtain an IP address automatically” and then select “Obtain DNS 
server address automatically.” Click “OK.” 

7.

Click “OK” or “Close” to close each window.

You will need to verify that the “HTTP Proxy” feature of your Web browser is 
disabled. This is so that your Web browser will be able to view the configuration 
pages inside your F5D6231-4 Wireless Gateway. The following steps are for Internet 
Explorer and for Netscape. Determine which browser you use and follow the 
appropriate steps.

1.

Open Internet Explorer and click the stop button. Click “Tools,” then “Internet 
Options.”

2.

In the “Internet Options” window click the “Connections” tab. Next, click the 
“LAN Settings...” button.

3.

Clear all the checkboxes.

4.

Click “OK,” and then click “OK” again to close the “Internet Options” window.

1.

Open Netscape and click the stop button. Click “Edit,” then click 
“Preferences...”

2.

In the “Preferences” window, under “Category” double-click “Advanced,” then 
click “Proxies.” Select “Direct connection to the Internet.” Then, click “OK.”

Now that you have configured your computer to connect to your F5D6231-4 
Wireless Gateway, it needs to obtain new network settings. By releasing any old IP 
settings and renewing them with settings from your F5D6231-4 Wireless Gateway, 
you will also verify that you have configured your computer correctly.

1.

From the Windows desktop, click the “Start” button, then “Programs,” then 
“Accessories,” and then click “Command Prompt.”

2.

In the “Command Prompt” window, type “IPCONFIG /RELEASE” and press the 
<ENTER> key.