Belkin International Inc. F5D6231-4 Manuel D’Utilisation
I
NSTALLATION
G
UIDE
8
3.
Type “IPCONFIG/RENEW” and press the <ENTER> key. Verify that your IP
address is now 192.168.2.xxx (2~255), your Subnet Mask is 255.255.255.0
and your Default Gateway is 192.168.2.1. These values confirm that your
F5D6231-4 Wireless Gateway is functioning.
address is now 192.168.2.xxx (2~255), your Subnet Mask is 255.255.255.0
and your Default Gateway is 192.168.2.1. These values confirm that your
F5D6231-4 Wireless Gateway is functioning.
4.
Type “EXIT” and press <ENTER> to close the “Command Prompt” window.
Now that your computer is configured to connect to your F5D6231-4 Wireless
Gateway, please skip to “Configuring Your Gateway” on page 12.
Gateway, please skip to “Configuring Your Gateway” on page 12.
Configuring Your Computer with Windows NT 4.0
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup by connecting your devices, configure
your computer to connect to your F5D6231-4 Wireless Gateway. Many ISPs issue
these numbers automatically using a networking technology known as Dynamic
Host Configuration Protocol, or DHCP. Other ISPs will specify your IP address and
associated numbers, which you must enter manually. This is also known as a static
IP address. How your ISP assigns your IP address determines how you will
configure your computer.
your computer to connect to your F5D6231-4 Wireless Gateway. Many ISPs issue
these numbers automatically using a networking technology known as Dynamic
Host Configuration Protocol, or DHCP. Other ISPs will specify your IP address and
associated numbers, which you must enter manually. This is also known as a static
IP address. How your ISP assigns your IP address determines how you will
configure your computer.
Here is what to do:
1.
From the Windows desktop click “Start,” then “Settings,” and click “Control
Panel.”
Panel.”
2.
Double-click the “Network” icon, then select the “Protocols” tab.
3.
Double-click “TCP/IP Protocol,” then select the “IP Address” tab.
4.
In the “Adapter” drop-down list, be sure your Ethernet adapter is selected. If
“Obtain an IP address automatically” is already selected, your computer is
already configured for DHCP. Click “Cancel,” and skip to Step 2 “Disable HTTP
Proxy.”
“Obtain an IP address automatically” is already selected, your computer is
already configured for DHCP. Click “Cancel,” and skip to Step 2 “Disable HTTP
Proxy.”
5.
In the “TCP/IP Properties” dialog box, click the “IP address” tab to locate your
IP address, subnet Mask, and default gateway. Record these values in the
spaces provided below.
IP address, subnet Mask, and default gateway. Record these values in the
spaces provided below.
6.
Click the “DNS” tab to see the primary and secondary DNS servers. Record
these values in the appropriate spaces below.
these values in the appropriate spaces below.
TCP/IP Configuration Setting
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Primary DNS Server
____.____.____.____
Secondary DNS Server
____.____.____.____
Default Gateway
____.____.____.____
Host Name