Belkin International Inc. F5D6231-4 Manuel D’Utilisation
I
NSTALLATION
G
UIDE
10
3.
Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that your IP
address is now 192.168.2.xxx (2~255), your Subnet Mask is 255.255.255.0,
and your Default Gateway is 192.168.2.1. These values confirm that your
F5D6231-4 Wireless Gateway is functioning.
address is now 192.168.2.xxx (2~255), your Subnet Mask is 255.255.255.0,
and your Default Gateway is 192.168.2.1. These values confirm that your
F5D6231-4 Wireless Gateway is functioning.
4.
Type “EXIT” and press <ENTER> to close the “Command Prompt” window.
Now that your computer is configured to connect to your F5D6231-4 Wireless
Gateway, please continue to “Configuring Your Gateway” on page 12.
Gateway, please continue to “Configuring Your Gateway” on page 12.
Configuring Your Macintosh Computer
You may find that the instructions here may not exactly match your screen. This is
because these steps was created using Mac OS 8.5. Mac OS 7.x and above are all
very similar, but may not be identical to Mac OS 8.5.
because these steps was created using Mac OS 8.5. Mac OS 7.x and above are all
very similar, but may not be identical to Mac OS 8.5.
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup by connecting your devices, configure
your computer to connect to your F5D6231-4 Wireless Gateway. Many ISPs issue
these numbers automatically using a networking technology known as Dynamic
Host Configuration Protocol, or DHCP. Other ISPs will specify your IP address and
associated numbers, which you must enter manually. This is also known as a static
IP address. How your ISP assigns your IP address determines how you will
configure your computer.
your computer to connect to your F5D6231-4 Wireless Gateway. Many ISPs issue
these numbers automatically using a networking technology known as Dynamic
Host Configuration Protocol, or DHCP. Other ISPs will specify your IP address and
associated numbers, which you must enter manually. This is also known as a static
IP address. How your ISP assigns your IP address determines how you will
configure your computer.
Here is what to do:
1.
Pull down the Apple Menu. Click “Control Panels” and select “TCP/IP.”
2.
In the TCP/IP dialog box, make sure that “Ethernet” is selected in the “Connect
via:” field.
via:” field.
If “Using DHCP Server” is already selected in the “Configure” field, your
computer is already configured for DHCP. Close the TCP/IP dialog box, and
skip to Step 2 “Disable HTTP Proxy.”
computer is already configured for DHCP. Close the TCP/IP dialog box, and
skip to Step 2 “Disable HTTP Proxy.”
3.
All the information you need to record is in the “TCP/IP” dialog box. Use the
space below to record the information.
4.
After writing down your IP settings, select “Using DHCP Server” in the
“Configure” field and close the window.
“Configure” field and close the window.
TCP/IP Configuration Setting
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Primary DNS Server
____.____.____.____
Secondary DNS Server
____.____.____.____
Default Gateway
____.____.____.____
Host Name