Boston Scientific Corporation CRM312005 Manuel D’Utilisation

Page de 50
9
The following screen buttons can be used to change the values and 
appearance of the traces:
Lead Selection Buttons—Select the lead traces to be displayed.
Speed Buttons—Select the desired speed button on the ECG 
display: Pause (||) (to freeze the trace), Play (>), or Fast-Forward (>>).
Printed Surface Gain—Select the appropriate value to adjust the 
surface gain of the traces that are captured on printouts.
Filter—Select On to minimize noise on the surface ECG.
Pacing Spike Display—Select On to show detected pacing spikes, 
annotated by a marker on the top waveform.
NOTE:  The values as set up on the startup screen will be the defaults 
used for the application traces. The corresponding values can be 
changed from the Trace Selections screen while in the application. For 
detailed application programming instructions, refer to the System Guide 
for the Guidant pulse generator being interrogated.
Keys
For specific instructions on how to operate the PRM keys and use the 
telemetry wand, refer to the System Guide for the Guidant pulse 
generator being interrogated. General key functions are summarized 
below in Table 1. The key pad on the right side of the PRM is shown in 
Figure 6.
Figure 5. The ECG screen, as accessed from the startup screen.
Speed Buttons
Lead 
Selection 
Buttons
Heart-Rate Indicator
Menu Buttons
            ECG Icon