Boston Scientific Corporation CRM312005 Manuel D’Utilisation
16
require unique data to be entered. Typically, the data are entered from a
keyboard window (as shown in Figure 8). The values entered will remain
in the value boxes when programmed; they will not move from a Change
column to a Present column.
keyboard window (as shown in Figure 8). The values entered will remain
in the value boxes when programmed; they will not move from a Change
column to a Present column.
Keyboard Window: Touch the first character of the new value; it will
appear in the data-entry box in the graphic keyboard. Continue until the
entire new entry appears in the box. To delete one character at a time,
starting with the last character, select the left arrow key on the graphic
keyboard. Each time the left arrow key is selected, a character will be
deleted in the box. To cancel any deletions or additions just made, select
the Cancel Changes button. When all the appropriate characters have
been selected, select the Close button on the graphic keyboard.
appear in the data-entry box in the graphic keyboard. Continue until the
entire new entry appears in the box. To delete one character at a time,
starting with the last character, select the left arrow key on the graphic
keyboard. Each time the left arrow key is selected, a character will be
deleted in the box. To cancel any deletions or additions just made, select
the Cancel Changes button. When all the appropriate characters have
been selected, select the Close button on the graphic keyboard.
NOTE: If, when the graphic keyboard initially appears, it contains data in
the value box, select the Clear button to delete all the characters in the
value box.
the value box, select the Clear button to delete all the characters in the
value box.
Copy button: On screens that contain a Copy button, you can simply
copy parameter values from one screen to another. Select the Copy
button. A window will appear with a Copy From column and a Copy To
column, with buttons below the columns. Select the desired buttons in
both columns, and then select the Copy button.
copy parameter values from one screen to another. Select the Copy
button. A window will appear with a Copy From column and a Copy To
column, with buttons below the columns. Select the desired buttons in
both columns, and then select the Copy button.
To program the device, follow the instructions in the System Guide for the
Guidant pulse generator being interrogated.
Guidant pulse generator being interrogated.
NOTE: If additional parameters require reprogramming, repeat these
steps. Multiple parameter changes can be programmed at one time
(batch programming).
steps. Multiple parameter changes can be programmed at one time
(batch programming).
MAINTENANCE AND HANDLING
Loading the Paper
The internal printer/recorder uses four-inch wide (110 mm)
thermosensitive printing paper. Model 6979 Printer Paper refills can be
ordered from Guidant.
thermosensitive printing paper. Model 6979 Printer Paper refills can be
ordered from Guidant.
Use the following procedure to load paper into the internal printer/
recorder:
recorder:
1.
Open the printer door.
2.
If any sheets from the previous pack remain but did not feed, remove
them and rotate the roller with clean fingertips to remove any small
pieces of paper still under the printhead.
them and rotate the roller with clean fingertips to remove any small
pieces of paper still under the printhead.
3.
If the paper is still enclosed in its original plastic packaging, remove
this covering from the pack.
this covering from the pack.
4.
Orient the pack such that the pagination mark (which is the small
black box that is visible inside the pack if you lift up the top sheet of
paper) is located nearest to the front of the programmer. (For a visual
black box that is visible inside the pack if you lift up the top sheet of
paper) is located nearest to the front of the programmer. (For a visual