VTech Telecommunications Ltd 80-9090-00 Manuel D’Utilisation

9

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.

The telephone base is ready for tabletop use. If you want to change to wall 
mounting, see Installation options on page 14 for details.

Rotate the wall mount bracket down and push it into the telephone base 
until it clicks into place. Plug the end of the corded handset cord into the 
telephone jack at the back of the telephone base. Plug the small end of 
the telephone base power adapter into the power line jack at the back of 
the telephone base and route the cord through the slot.

2.  Rotate the wall mount bracket up and push it into the telephone base until 

it clicks into place.  

3.  Plug the telephone line(s) according to the instructions below.

Option 1:  If you have separate wall jacks for each line, plug the telephone 
lines as shown below.

1.

Plug one end of the clear 
telephone line cord into the 
LINE 2 telephone jack at the 
bottom of the telephone base.

Route the cords through the 
slots.

Line 1 telephone 
wall jack

Line 2 telephone 
wall jack

Plug the other ends of 
the telephone line cords 
into the telephone wall 
jack, or into DSL filters if 
you have DSL high-speed 
Internet service.

Plug one end of the black 
telephone line cord into the 
LINE 1/L1+L2 telephone jack 
at the bottom of the telephone 
base.

Raise the antenna.

1

2