VTech Telecommunications Ltd 80-9090-00 Manuel D’Utilisation
10
Getting started
Telephone base and charger installation
Option 2: If you have a 2-line wall jack, plug the 4-conductor telephone line
as shown below.
as shown below.
Charger installation
IMPORTANT INFORMATION:
Use only the power adapter(s) provided with this product. To obtain a replacement, visit our
website at
www.telephones.att.com
or call
1 (800) 222-3111
.
In Canada, dial
1 (866) 288-4268
. For more detailed instructions, refer to the online
Complete user’s manual at
www.telephones.att.com/manuals
.
The power adapters are intended to be correctly oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet.
•
•
Plug the power adapter into an electrical outlet not
controlled by a wall switch.
controlled by a wall switch.
Route the cord through the
slot.
slot.
Raise the antenna.
Line 1 + line 2
telephone wall jack
telephone wall jack
Plug one end of the black
telephone line cord into the
LINE 1/L1+L2 telephone jack
at the bottom of the telephone
base.
telephone line cord into the
LINE 1/L1+L2 telephone jack
at the bottom of the telephone
base.
Plug the other end of the
black telephone line cord
into the telephone wall
jack, or into a DSL filter if
you have DSL high-speed
Internet service.
black telephone line cord
into the telephone wall
jack, or into a DSL filter if
you have DSL high-speed
Internet service.