VTech Telecommunications Ltd 80-9090-00 Manuel D’Utilisation

14

Getting started

Installation options

Your telephone base is ready for tabletop use. If you want to mount your 
telephone on a wall, follow the steps below to connect the telephone base 
with a standard dual-stud telephone wall mounting plate. You may need a 
professional to install the wall mounting plate.

Unplug the power adapter from the power outlet. Unplug the telephone 
line cord from the wall jack (or DSL filter). 

Put the handset aside. Hold down the switch hook on the telephone base, 
and then slide the handset tab upwards to remove it from the slot. Rotate 
the handset tab by 180 degrees. Then replace the handset tab into the 
slot until it locks into position.

Press down on the tabs of the wall mount bracket as indicated to release 
it from tabletop orientation.

Rotate the wall mount bracket down and push it into the telephone base 
until it clicks into place.

Plug the telephone line cord (or DSL filter) into the wall jack. Plug the 
power adapter into a power outlet not controlled by a wall switch. Align 
the slots on the back of the telephone base with the studs of the wall 
mounting plate.

Slide the telephone base down until it locks securely. Bundle the 
telephone line cord and power adapter cord neatly with twist ties.

1.

2.

3.

4.

5.

6.

1

5

4

6

2

3