Itron Inc. 500GR Manuel D’Utilisation

Description
2 band clamps, 2 tamper seals, pipe bracket, 2
cable ties, 1 adapter plate and the following
screws:

1. SCR-0215-001 (2) #8-16 x ½ inch slotted

pan-head tapping screw, corrosion-resistant
steel. Attaches the adapter plate to the pipe
bracket.

2. SCR-0215-002 (2) #8-16 1-inch slotted pan-

head tapping screw, corrosion-resistant steel.
Attaches the ERT module to the adapter
plate.

1. Remove the pipe bracket and clamp from the

kit.

2. Loosen the band clamp screw until the end of

the band releases.

3. Push the end of the clamp's band through the

holes in the pipe bracket as shown.

4. Place the band clamp around the pipe. The

band will loosely wrap around the pipe.

1. Push the end of the band through the band

clamp screw assembly.

2. Turn the band clamp's screw assembly to fit

into the pipe bracket opening.

3. Tighten the clamp screw until the band clamp

is secure on the pipe.

5. Place the adapter plate on the pipe bracket

with the mounting lug at the top. The adapter

plate screw bosses fit into the pipe bracket

recess.

Mounting the Remote 500G ERT Module

OpenWay Riva 500G Gas ERT Module Installation Guide, Remote Mount TDC-1678-000

10