Itron Inc. 500GR Manuel D’Utilisation

Selecting a wall or flat vertical mounting location

Carefully select a mounting location free from electrical wires. The mounting location must
have the proper clearance to accommodate the 1-1/2-inch module mounting screws so
nothing is damaged by the drill or mounting screws. Use a compatible mounting screw.

1. Drill three pilot holes in the mounting surface.

The drilled pilot holes for the two bottom screws

must be on a horizontal line.

1. 3 inches
2. 1-11/16 inches
3. 3-3/8 inches

2. Screw the top mounting screw into the top pilot

hole drilled in step one, leaving enough of the

screw protruding so the ERT module lug recess

on the back plate slides over the screw head and

fits completely into the lug recess. Make

adjustments as necessary.
3. Install the two bottom mounting screws.

Tighten the screws in an alternating pattern to

secure the module firmly in position.

4. Place a new tamper seal over each bottom

ERT module mounting screw as required.

Mounting the Remote 500G ERT Module

OpenWay Riva 500G Gas ERT Module Installation Guide, Remote Mount TDC-1678-000

12