DEI Headquarters Inc. DEI474P Manuel D’Utilisation

Model 473, 3–Button HF, Stealth Code Remote

Date Code

MADE IN TAIWAN

© 2002 Directed Electronics, Inc. Vista CA 92083

All rights reserved. 9/02

P/N 473P

A remote that has been programmed to a single-but-
ton configuration will control both arm/lock and dis-
arm/unlock from the same button. Using the one-but-
ton configuration, the transmitter buttons are assigned
to the following functions:

The lock/unlock icon button arms/locks and dis-
arms/unlocks the system.

The AUX icon button operates Channel 2 and silent
arm/lock and disarm/unlock.

The siren icon button operates Panic only.

When pressed simutaneously, the lock/unlock and
AUX icon buttons activate Channel 3.

This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.

CAUTION! Changes or modifications not expressly

approved by the party responsible for compli-
ance could void the user's authority to oper-
ate this device.

1.

Key. Turn the key to the ON position 

2.

Door. Open a door.

3.

Choose. Within 5 seconds press and release the

Valet/Program button the number of times corre-

sponding to the desired channel listed below.

Once you have selected the channel, press the

Valet/Program button once more and hold it. The

LED will flash the same number of times as the

channel selected and the siren will chirp to confirm

the selected channel. Do NOT release the button.

4.

Transmit. While holding the Valet/program

button, press the button from the transmitter you

wish to assign to that channel. The unit will chirp

to confirm that the transmitter has been taught to

the receiver 

5.

Release. Once the code is learned you can release

the Valet/Program button and remove the key.

The following Learn Routine can be used to program

this replacement transmitter to the system. In order to

enter the Learn Routine, the system’s Valet/Program

switch must be plugged into the BLUE port.

8

Auto-learn Single-Button Configuration

9

Delete All Transmitters

473_474 Blister Packs.qxd  9/24/2002  3:33 PM  Page 4