DEI Headquarters Inc. DEI7352 Manuel D’Utilisation
26
© 2011 Directed Electronics. All rights reserved.
Valet mode
You can prevent your security system from automatically arming and
trig ger ing by using Valet® Mode. This is very useful when washing the
ve hi cle or having it serviced. In Valet Mode, the security system will
not arm, even with the remote trans mit ter, but all convenience functions
(door locks, trunk re lease, etc.) will continue to work nor mal ly.
trig ger ing by using Valet® Mode. This is very useful when washing the
ve hi cle or having it serviced. In Valet Mode, the security system will
not arm, even with the remote trans mit ter, but all convenience functions
(door locks, trunk re lease, etc.) will continue to work nor mal ly.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet button within 10 seconds.
2. Turn the ignition off.
3. Press and release the Valet button within 10 seconds.
The status LED lights solidly if you are en ter ing Valet Mode, and goes
off when you exit Valet Mode.
off when you exit Valet Mode.
To enter or exit Valet Mode using the transmitter:
1. Open any vehicle door.
2. Press
�������
.
3. Press
�������
and then press
�������
again.
The status LED lights solidly if you are en ter ing Valet Mode, and goes
off when you exit Valet Mode.
off when you exit Valet Mode.