DEI Headquarters Inc. NAH6602 Manuel D’Utilisation

 

 

P. 17 

The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle. 

Caution: The programming of your system should be left to a professional. Changing any one 
of the settings may affect the operation of your remote starter. 

This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned 
to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also 
lock any door that was unlocked and opened (then closed) the next time the break pedal is 
pressed. When the key is turned to the OFF position, the doors will automatically be unlocked. 

(Disabled by default.) Before your vehicle can be remote-started, the factory security system must 
first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory 
security systems that automatically unlock the doors when the security system is disarmed. 
To keep your vehicle protected when the factory security system is disarmed for a remote start, 
Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down 
by remote or after its runtime has expired, Secure Lock will also rearm your factory security system 
and relock the doors. 

If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if 
the vehicle is parked indoors there is no danger of it starting accidentally by remote control. If the 
vehicle has a manual transmission, it should be set into ready mode before activating the Home 
Valet™. 

Note: Once the Home Valet Mode is activated, the vehicle will not start by remote, but the 
alarm functions will remain active.  

To take the system into home valet mode: 

1.  Press the 

 or   button. 

2.  Within 3 seconds, press the 

 and    buttons simultaneously  

3.  The transmitter will beep once and the 

 icon will display. 

 

To take the system out of home valet mode: 

• 

Turn the ignition key to the IGNITION ON (RUN) position. 

The system will warn you if someone attempts to start your vehicle while it stands in home valet 

mode. The parking lights will: 

Turn ON then OFF; then 
Flash twice, pause; then 
Flash twice again. 

This feature will eliminate accidental remote starts, e.g. when children are playing with the 
transmitter. 
Safe start enabled:   If this feature is enabled, the user must press the   button twice within 
 

3 seconds to remote-start the vehicle.