Microwave Radio Communications LLC PTX127T1CG Manuel D’Utilisation
5
Advanced Operation
5-1
PTX-PRO User and Technical Manual
Advanced Operation
5.1
Chapter Overview
This chapter describes how to use the MRC Radio Configurator
(Configurator) software to configure settings in the PTX-PRO 13
GHz Transmitter (PTX-PRO). This information is provided and
intended for use by the technical staff.
(Configurator) software to configure settings in the PTX-PRO 13
GHz Transmitter (PTX-PRO). This information is provided and
intended for use by the technical staff.
A summary of settings that can be made using the front panel
control switches and those that can be made using the
Configurator software is provided in
control switches and those that can be made using the
Configurator software is provided in
.
Here are the topics covered:
Topic
Page
5.2
Before You Begin
Before you begin, you should review the following topics.
5.2.1
PTX-PRO
The procedures described in this chapter assume you already
know how to operate your PTX-PRO. If this is not the case,
please review the following Chapters in this manual:
know how to operate your PTX-PRO. If this is not the case,
please review the following Chapters in this manual:
“Introduction” Chapter on page 1-1
“Product Description” Chapter on page 2-1
“Routine Operation” Chapter on page 3-1
“Product Description” Chapter on page 2-1
“Routine Operation” Chapter on page 3-1
5.2.2
Configurator Software
This chapter also assumes the Configurator software is installed
and operating on your PC and that you are familiar with its tabs,
buttons, pages, etc.
and operating on your PC and that you are familiar with its tabs,
buttons, pages, etc.
5.2.3
Settings
Before beginning to create or program a configuration or channel
plan into your PTX-PRO, you must define what settings are
required.
plan into your PTX-PRO, you must define what settings are
required.