TransCore 05716 Manuel D’Utilisation
Multiprotocol Rail Reader System Guide
8-8
Figure 8-4 Hyper Terminal Main Screen
Verifying Communications
You must verify that the MPRR and the PC or laptop are communicating.
To verify communications
1.
Start the terminal emulation application as described previously in
.
Note: When testing the MPRR using a laptop, TransCore recommends that you con-
figure laptop communication parameters to match those of the host computer to which
the MPRR will be connected after testing and configuration are completed.
figure laptop communication parameters to match those of the host computer to which
the MPRR will be connected after testing and configuration are completed.
2.
Cycle the power on the MPRR.
Upon startup, the MPRR transmits a sign-on message, displayed on the terminal
emulation screen as shown in
emulation screen as shown in
or a boot ROM failure message.