TransCore 05716 Manuel D’Utilisation
3-3
Chapter 3
Choosing, Installing, and Removing Tags
This chapter describes the various tag types compatible with the
Multiprotocol Rail Reader (MPRR) and the procedures for installing and
removing compatible internal and external tags.
Multiprotocol Rail Reader (MPRR) and the procedures for installing and
removing compatible internal and external tags.
Compatible Tag Types
The MPRR provides the capability to read the various TransCore tags employing
Super eGo (SeGo) protocol. Depending on options ordered, the MPRR can read SeGo
protocol, ATA-protocol, and ISO-compliant tags.
Super eGo (SeGo) protocol. Depending on options ordered, the MPRR can read SeGo
protocol, ATA-protocol, and ISO-compliant tags.
See
for information about the numerous tag models.
Reader and Tag Model Interoperability
lists the tags that are read by the MPRR. See
www.transcore.com/pdf/Tag-
Reader-Matrix.pdf
for most current information concerning readers and supported tag
protocols.
Recommended Mounting Locations
Each piece of rail equipment has a specific area or window for optimum tag place-
ment. Tag positioning in the tag placement window is based on the center of the tag in
reference to window physical specifications.
ment. Tag positioning in the tag placement window is based on the center of the tag in
reference to window physical specifications.
Required Materials
•
Torque wrench (in/lb. range)
•
Bolts and nuts (#10-24 NC threaded studs and nuts)
•
Aluminum pop rivets
•
Pop rivet gun
Table 3-1 Tags Read by the MPRR
Reader
Beam Tags
Battery Tags
MPRR
AT5110; AT5112; AT5113;
AT5118; AT5125; AT5133;
AT5118; AT5125; AT5133;
AT5114; AT5510; AT5541; AT5549