TransCore 05716 Manuel D’Utilisation
Multiprotocol Rail Reader System Guide
4-4
Installation Accessory Options
lists optional TransCore MPRR installation accessory items.
Additional Materials Needed for Testing
You need these additional materials to perform the pre-tests on the MPRR:
•
Test tags, supplied by the TransCore dealer or distributor
•
Suitable 16 to 20V AC or 16 to 28V DC power wiring for the MPRR
•
Audible circuit tester and 9V DC battery for circuit tester power
•
Wire stripper
•
At least one MPRR-compatible antenna
•
Suitable RF interface coaxial cable
Pre-installation Testing of the MPRR
Before installing the MPRR permanently at the site, you should use an audible circuit
tester to confirm that the MPRR has power and can read a tag presented in the tag read
zone.
tester to confirm that the MPRR has power and can read a tag presented in the tag read
zone.
Testing the MPRR Using an Audible Circuit Tester
An audible circuit tester is also called a buzz box. These boxes are available at some
electronic parts supply stores, or you can make a buzz box, as shown in
electronic parts supply stores, or you can make a buzz box, as shown in
The buzz box is powered by a 9V DC battery and is equipped with two alligator-clip
leads. When you touch the leads together, the box makes an audible sound.
leads. When you touch the leads together, the box makes an audible sound.
Table 4-1 Installation Accessories
Part No.
Description
58-7001-001
MPRR-to-Train Recording Unit (TRU) six-foot cable assembly
58-7001-002
MPRR-to-TRU 20-foot cable assembly
58-7001-003
MPRR cable assembly, no TRU
20-7001-001
MPRR check tag accessory kit