TransCore 05946 Manuel D’Utilisation

Installation Instructions

16-0042-001 Rev A2

PocketPass is designed for mounting to a vehicle's interior windshield surface using 3M™ 
Dual Lock™ strips. This mounting method provide for easy mounting and removal when 
portability is needed.

Metallized Windshields

Some vehicle windshields contain a metallic treatment that could prevent an interior windshield-mounted 

device from working correctly. If you have a vehicle with a metalized windshield, contact your local 

customer service center for more information. If your vehicle’s metalized windshield has a metal-free 

zone, it is typically located near the rearview mirror.

Required Supplies

• 

PocketPass

• 

Commercial glass cleaner and paper towels

Installing the PocketPass with Dual Lock Strips

1.  Choose the location for your PocketPass (Figure 1). It should be mounted as close to the bottom 

center of the windshield as possible; at least 3 inches away from the windshield frame or 

dashboard, and not behind the windshield wipers.