TransCore 0596465PT15 Manuel D’Utilisation
Encompass 4H Reader System Guide
8-4
As an example, a label reading 10-4002-004 indicates that this 915-MHz Encompass
4H Reader is configured with an integrated antenna, RS
4H Reader is configured with an integrated antenna, RS
–
232 and Wiegand communi-
cations, and reads SeGo and IAG protocol tags.
Default Operating Parameter Settings
contains the factory default configuration settings for the Encompass 4H
Reader operating parameters.The default configuration settings may not be the correct
operating configuration settings for a specific site. Changes to the configuration set-
tings may have to be made, depending on the site plan, as described in
operating configuration settings for a specific site. Changes to the configuration set-
tings may have to be made, depending on the site plan, as described in
.
Review the default configurations shown in
to determine which parameters,
in addition to operating frequency and operating range, need to be adjusted. Refer to
for a complete list of parameters and the corresponding
commands.
Note: The dual-protocol Encompass 4H Reader internal timing varies depending on
the operative tag read mode and the type of tag in the read field.
the operative tag read mode and the type of tag in the read field.
Table 8-2 Encompass 4H Reader Default Configuration Settings
Parameter
Setting
Command
Operating mode
Data
00
Baud rate
9600
1005
Stop bits
1
1010
Parity
None
1020
Time and data appended
Enabled
302
Auxiliary information appended
Disabled
310
Unique ID code criteria
Separation of 1 ID
4100
Wiegand mode
Disabled
450
Tag translation mode
Disabled
452
Multi-tag sort
Disabled
454
eGo and eGo Plus tag
initialization during multi-tag sort
initialization during multi-tag sort
Enabled
456
Second alternative group select
Disabled
458
Wiegand transmit mode
1 second
4601
Third alternative group select
Disabled
490
Fourth alternative group select
Disabled
492