TransCore 0596465PT15 Manuel D’Utilisation
Encompass 4H Reader System Guide
3-8
Some vehicle windshields contain a metallic treatment that could prevent an interior
windshield-mounted tag from being read. However, many of these metallized wind-
shields have areas that are not metallized. On a vehicle without open areas in its met-
allized windshield, you might need to install an Encompass 4H Reader-compatible
LPT on the vehicle. See the section
windshield-mounted tag from being read. However, many of these metallized wind-
shields have areas that are not metallized. On a vehicle without open areas in its met-
allized windshield, you might need to install an Encompass 4H Reader-compatible
LPT on the vehicle. See the section
. Contact TransCore for more information. See the section
.
Required Materials
You need the following supplies to install an eGo Plus Sticker Tag:
•
Glass cleaner, mild detergent and water, or any cleaning solution appropriate for
your windshield
your windshield
•
Clean, dry cloth
•
eGo Plus Sticker Tag
Positioning eGo Plus Sticker Tags
TransCore designed the eGo Plus Sticker Tag to be installed on the upper center or
upper corner portion of the windshield.
upper corner portion of the windshield.
and
illus-
trate possible upper center tag placement locations. If the upper portion of the
windshield is tinted with an aftermarket conductive tint, use placement shown in
windshield is tinted with an aftermarket conductive tint, use placement shown in
Mirror Post Attached on Windshield
Choose this placement option as shown in
if the mirror post is attached on
the windshield.
Figure 3-6 eGo Plus Sticker Tag Placement
Mirror Post Attached on Header
Choose this placement option if the mirror post is attached on the header as shown in
or if the upper portion of the windshield is tinted with a conductive tint.