TransCore 0596465PT15 Manuel D’Utilisation

Page de 276
Choosing, Installing, and Removing Tags
3-11
Installing eGo Plus Security Sticker Tags
An eGo Plus Security Sticker Tag is located in the same area on the windshield as the 
eGo Plus Sticker Tags. See 
 for this 
information. The eGo Plus Security Sticker Tag is slightly less flexible than the eGo 
Plus Sticker Tag so the installation instructions differ. Detailed instructions for install-
ing the eGo
®
 Plus Security Sticker Tag are found in the pocket guide “Quick and Easy 
Installation Instructions for the eGo
®
 Plus Security Sticker Tag.”
eGo Plus Security Sticker Tag Installation Procedures
Caution
Confirm that the outside temperature is above 50°F (10°C). The security sticker tag 
may not adhere correctly if the temperature is below this temperature.
To install the eGo Plus Security Sticker Tag
1.
Determine the tag installation location for the vehicle using the placement 
guidelines in the section 
2.
Thoroughly clean the interior surface of the windshield behind and around the 
rearview mirror where the tag will be located.
3.
Dry the tag location area thoroughly using a clean, dry cloth.
4.
Remove the backing from the tag to expose the adhesive.
Caution
Ensure that the tag is correctly located before touching it to the glass. Once the 
security sticker tag is applied to the glass, it cannot be moved without damage to the 
tag.
5.
Holding the sticker tag by its edges (
), position the tag in the correct 
area of the windshield (determined in Step 1), making sure the tag is oriented 
horizontally and is at least two inches (5 cm) from the windshield frame and 0.75 
inch (1.9 cm) from the mirror post.