TransCore 0596465PT15 Manuel D’Utilisation
Encompass 4H Reader System Guide
4-4
Installation Accessory Options
Table 4-1 Installation Accessories
Part No.
Description
54-1620-001
Wall or ceiling mount kit
58-1620-001
5-ft connector cable harness
58-1620-002
20-ft connector cable harness
20-1620-003
Connector kit only
56-1620-004
13-pair cable (sold by the foot)
76-1620-005
110V AC to 18V AC Class C transformer
76-1620-006
12V AC to 18V AC step-up transformer
16-4000-002
Encompass 4H Reader System Guide (this manual)
76-1620-008
220V AC to 18V AC Class C transformer
Note: The Encompass 4H Reader may be ordered with a multwire cable harness (part
number 58-1620-001 or 58-1620-002 in Table 4-1) as a separate accessory. One end
has a waterproof connector for the Encompass 4H Reader, and the other end has 13
pairs of color-coded wires.
number 58-1620-001 or 58-1620-002 in Table 4-1) as a separate accessory. One end
has a waterproof connector for the Encompass 4H Reader, and the other end has 13
pairs of color-coded wires.
Additional Materials Needed for Testing
You need these additional materials to perform the pre-tests on the Encompass 4H
Reader:
Reader:
•
Test tags, supplied by the TransCore dealer or distributor
•
Suitable 18V AC or 18V DC power wiring for the Encompass 4H Reader
•
Audible circuit tester and 9V DC battery for circuit tester power
•
Wire stripper
Pre-installation Testing of the Encompass 4H Reader
Before installing the Encompass 4H Reader permanently at the site, you should use an
audible circuit tester to confirm that the Encompass 4H Reader has power and can
read a tag presented in the tag read zone.
audible circuit tester to confirm that the Encompass 4H Reader has power and can
read a tag presented in the tag read zone.