Lotek Wireless Inc SRX400158-170 Manuel D’Utilisation
12
ESC
The ESC key is the general "return" operator. Most commonly it returns you to the previous
menu or to the default receiver frequency and gain display. Alternatively, during data entry, it is
used to select the current default value. If pressed simultaneously with the SHIFT key, a
hardware reset will occur and the receiver will return to its power-on state.
menu or to the default receiver frequency and gain display. Alternatively, during data entry, it is
used to select the current default value. If pressed simultaneously with the SHIFT key, a
hardware reset will occur and the receiver will return to its power-on state.
F TABLE
The F TABLE key is used to program the frequency table used for scanning. The corresponding
menu has five options. That menu appears in the display as follows:
menu has five options. That menu appears in the display as follows:
1)Add 2)Del/View 3)Copy
4)Partition 5)Size
4)Partition 5)Size
Press the numeric key corresponding to the option you wish. Pressing ESC will return you to
the power-on default display.
the power-on default display.
1) Add
This option allows you to add frequencies to the frequency table in the current partition. When
selected the following appears on the display:
selected the following appears on the display:
Add >
ESC exits
ESC exits
Using the numeric keys, enter the desired frequency. After the first three digits are entered, a "."
appears forcing the display to read in MHz. After entering three more digits (for an accuracy of
1 kHz) the frequency is accepted. If the frequency is out of the receiver tuning range, a "Value
out of range" message appears and the prompt reappears. When the frequency has been
accepted, the prompt immediately reappears and entry can continue. Press the ESC key when
finished.
appears forcing the display to read in MHz. After entering three more digits (for an accuracy of
1 kHz) the frequency is accepted. If the frequency is out of the receiver tuning range, a "Value
out of range" message appears and the prompt reappears. When the frequency has been
accepted, the prompt immediately reappears and entry can continue. Press the ESC key when
finished.
2) Del/View
When this option is selected, a display similar to the following appears:
148.000MHz
1)Delete < = = > SCROLL
1)Delete < = = > SCROLL
The frequency displayed is the first one in the table of the current partition. If you wish to delete
this frequency, press 1. If you wish to view the next frequency in the table, press 2. The next
frequency will be displayed with the same options. After the final frequency in the table, the
display returns to the F TABLE menu.
this frequency, press 1. If you wish to view the next frequency in the table, press 2. The next
frequency will be displayed with the same options. After the final frequency in the table, the
display returns to the F TABLE menu.