Thomson 2-5110A Manuel D’Utilisation

BLACK WIRE

RED WIRE

BATTERY

PRESS DOWN

FIRMLY

2. Snap the ends of the belt clip into place.

Replacing the Batteries

Handset Battery

1. Make sure the telephone is

OFF (not in TALK mode) before you replace battery.

2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack from the jack inside the bat-

tery compartment and remove the battery pack.

4. Insert the new battery pack and connect the plug on the battery pack to the

jack inside the compartment.

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the

compartment. To ensure proper battery installation, the connector is keyed and can be
inserted only one way.

5. Close the battery compartment by pushing the door up until it snaps into place.

6. Place the handset in the

charging cradle.

Allow the handset battery to properly charge (for 16 hours) prior to ﬁrst use or when you

install a new battery pack. If you do not properly charge the phone, battery performance

will be compromised.

CAUTION: To reduce the risk of ﬁre or personal injury, only use ATLINKS

Ni-MH

-battery

model

5-2683

Handset Memory Retention

When battery is disconnected the handset has the capability to hold the user

Other Information