Thomson 2-7951AH Manuel D’Utilisation

1

.  Place the handset in the base cradle. The charge/in use 

indicator turns on, verifying the battery is charging.

5.  Allow the phone to charge for 1 hours prior to first use. If 

you don’t properly charge the phone, battery performance is 

compromised.

1.  Plug the AC power adaptor into the electrical outlet and the DC 

connector into the jack on the back of the base.

.  Plug one end of the straight telephone line cord into the jack on 

the bottom of the base. 

.  Close the kick-stands on the bottom of the base unit if you’ve 

opened them before. 

.  Feed the line cord through the groove and plug the end into the 

modular telephone jack.

5.  Slip the mounting holes (on the bottom of the base) over the 

wall plate posts and firmly slide the unit down into place. 

This section shows you how to set up your answering system to 

receive incoming calls. Before you begin the set up process, you 

must turn on the answering system.
•  Press the 

ANS ON/OFF button to turn the answering system 

on and off. The Message Indicator lights when the answering 

system is on. The indicator blinks when you have new 

messages.