Thomson 2-7951AH Manuel D’Utilisation

NOTE: If the clock is not set, the date and time display will

blink. The blinking will stop when user updates the date/

time from the Handset menu, or the base receives a call

with CID having date and time stamp.

Programming Functions

The system uses a menu structure to give you access to all of the

built-in features. You may program the following items in main

menu: Intercom, Setup HS, Setup BS, Date/Time, Registration and

Answer system.

NOTE: If the handset is not registered, or is out of range,

Setup BS and Date/Time are not programmable, and

Unavailable displays as you try to enter these two menus.
NOTE: During programming, you may press the MUTE/

ringer on/off button at any time to exit the sub-menu

and return to the main menu, or press FLASH/exit to exit

programming and return to standby screen.
NOTE: If no key is pressed for 60 seconds, the handset will

automatically exit programming and return to standby

screen.

Handset Setup

1. Make sure your phone is

OFF (not in talk mode).

. Press the

MENU button to go to the main menu.

. Press

CID/VOL (3or4) button to scroll to Setup HS.

. Press

MENU button to confirm and you may program the

following items: Ring Volume, Tones, Auto Talk, Handset Name

and Language.

Language

From the Setup HS Menu:
1. Press the

CID/VOL (3or4) button to scroll to the Language

sub-menu.