Rosslare Enterprises Ltd AYC-E60 Manuel D’Utilisation
Controller Functionality
AYC-E/Q60 Family Instruction Manual
67
If the Programming code is valid, all memory is erased. You hear
three beeps and the controller returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
If the Programming code is invalid, you hear a long beep and the
controller returns to Normal mode without erasing the memory
contents.
contents.
6.10.18
Replacing a Lost Programming Code
The AYC-E/Q60 must be in Normal mode; otherwise, this
does not work. Make sure that the Mode LED is green
before proceeding.
does not work. Make sure that the Mode LED is green
before proceeding.
1.
Remove power from the Power Supply Unit.
2.
Press the REX button on the Power Supply Unit.
3.
Apply power to the unit with REX button pressed.
4.
Release the REX button.
5.
You now have 15 seconds to program a new Programming code
into the Access Control unit using the default code based on the
PIN code length you chose (see Table 4) before the controller
PIN code length you chose (see Table 4) before the controller
reverts to the existing code.
6.10.19
Replacing a Lost Normal/Secure Code
The AYC-E/Q60 must be in Secure mode; otherwise, this
does not work. Make sure that the Mode LED is red before
does not work. Make sure that the Mode LED is red before
proceeding.
1.
Remove power from the Power Supply Unit.
2.
Press the REX button on the Power Supply Unit.
3.
Apply power to the unit with the REX button pressed.
4.
Release the REX button.
5.
You now have 15 seconds to program a new Normal/Secure code
into the Access Control unit using the default code based on the
PIN code length you chose (see Table 4) before the controller
PIN code length you chose (see Table 4) before the controller
reverts to the existing code.