Visonic Inc. K980MCW Manuel D’Utilisation
2
DE3637
Do not expose to air drafts
Do not install outdoors
Prevent direct sunlight from
reaching the detector
Keep wiring away from
electrical power cables
electrical power cables
Do not install behind partitions
The unit must be installed so that the expected motion of a
intruder would be perpendicular to the zones of detection.
intruder would be perpendicular to the zones of detection.
Important! The detector is immune to 36 kg
(80 lb) animals moving on the floor or
climbing on furniture as long as the activity
takes place below 1 m (3 ft). Above the 1 m
(3 ft) height limit, the detector is immune to
18
(80 lb) animals moving on the floor or
climbing on furniture as long as the activity
takes place below 1 m (3 ft). Above the 1 m
(3 ft) height limit, the detector is immune to
18
kg
(40
lb)
pets,
but
the
pet
immunity
will
decrease as the pet gets closer to the detector. It is therefore
recommended to select a mounting location that minimizes
potential close proximity of animals.
These characteristics have not been verified by UL.
recommended to select a mounting location that minimizes
potential close proximity of animals.
These characteristics have not been verified by UL.
3.2 Battery Insertion
It is recommended to power up the detector and let the target
receiver “learn” the transmitter’s ID before actual installation.
receiver “learn” the transmitter’s ID before actual installation.
1st.Remove the front cover as shown in Figure 3.
Figure 3. Cover Removal
B. Insert the battery into the battery clip - observe polarity (see
Figure 4).
Figure 4. Inside View