Advance Security Inc T36 Manuel D’Utilisation

 

D. PARKING LIGHT: 

Chirp Function 

Parking 

light 

Function 

1 chirp 

Arm 

 

1 flash 

Arm 

2 chirps 

Disarm 

 

2 flashes 

Disarm 

3 chirps 

Ajar Warning 

 

3 flashes 

Disarm / Triggered 

4 chirps 

Disarm / Triggered 

 

12 flashes 

Car Locator 

6 chirps 

Car Locator 

 

Constant On 

Under Remote Start 

1. Press 

  button on the transmitter. 

2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The 

vehicle door will lock upon arming when interfaced with the security system. 

 

   

 

 

 

 

 

 

AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.   

Spin up the

   

switch to the page

 1

 and then press the “Silent Arm” button

or Press the 

transmitter 

  buttons 2 seconds to arm your security system, No chirp sound will be heard, arm 

confirmation will be through the vehicles parking lights only. 

Bypass The Zone 4: Spin up the

   

switch to the page

  2

 and 

then press the button 

 or press the   - 

  button within 5 

seconds on the transmitter will arm the security system and 
by-pass the zone 4-shock sensor.

 

Bypass The Zone 6: Spin up the

   

switch to the page

  2

 and 

then press the button 

 or press the 

 - 

 - 

  button within 5 

seconds on the transmitter will arm the security system and 
by-pass the zone 6-shock sensor..

Bypass The Zone 4 and Zone 6: Spin up the

   

switch to the page

 2

 and then press 

the button 

 or press the 

 - 

 - 

 - 

  button within 5 seconds on the 

transmitter will arm the security system and by-pass the zone 4 and 6-shock sensor. 
.The system will chirp one additional time to confirm the sensor bypass mode was 
activated. The sensor bypass feature is programmed to activate for one arming cycle 
only. The security system will return to normal operation during the next arming cycle. 

 

HIDDEN ALARM FUNCTION: Spin up the

   

switch to the page

 1

 and then press the 

“Hidden Alarm” button or press the 

  button first; within 3 seconds press the   

button to activate the hidden alarm function. The security system will arm and with 
“Hidden Alarm Function” The siren / horn will be silenced even if the sensor is 
triggered in the armed status. 

Active arming / disarming is controlling your security system via the remote transmitter. This security 
system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 
seconds after the last door is closed. Operation is as follows.   

1. Turn the ignition to the “OFF” position and exit the vehicle. 
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any 

door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the 
vehicle all entrances are closed. 

3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1] 

time and the parking lights will flash [1] time. 

PASSIVE ARMING WITH PASSIVE DOOR LOCKING: 

    The vehicle doors will automatically lock after passive arming cycle has been completed. 

PASSIVE ARMING BY-PASS: While the system disarmed, Press the 

  button twice, the security will 

respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporally state for 
as long as you wish. To exit passive by-pass, press the transmitter 

  or 

  button and the system will 

return to normal status.   

 

13