Advance Security Inc TR06AM Manuel D’Utilisation

MAY/23/ 2003 

RST771IN 

15 

3  Press and release the transmitter 

  button corresponding to the feature ‘Arming mode’ you want to 

program. [1] LED flash, [1] chirp to indicate you are in features “Active Arming”. 

4  Depress the transmitter   

button twice to change the feature. [3] LED flash, [3] chirps to indicate your 

are in features “Passive Arming with Passive Door Locking ”. 

5 Depress the transmitter 

  button corresponding to the features ”Rearm on/off”’ you want to 

program…….. 

 

Press 
Transmitter 
Button 

One Chirp /   
LED one pulse 
Factory Default 
Setting 

Two Chirps / 
LED two pulses 
 

Three Chirps / 
LED three pulses 
 

Four Chirps / 
LED four pulses   
 

1 

 

All chirps on 

Siren chirp on only 

Horn chirp on only 

All chirps off 

2 

 

Active arming 

Passive arming 
without passive door 
locking 

Passive arming 
with passive door 
locking. 

 

3 

 

Automatic Rearm 
on 

Automatic Rearm off 

 

 

4 

 

3 seconds delay 
Door Ajar error 
chirp 

30 seconds delay 
Door Ajar error chirp. 

 

 

5 

 

+ 

 

Without this feature 

With Dome light turns 
on after ignition off 
(45 second door 
by-pass) 

 

 

6 

 

+

 

   

Without Car-jack 
mode 

Active Car-jack mode    Passive Car-jack 

mode 

 

7 

+ 

 

Panic with Ignition 
off 

Panic with Ignition on 
& off 

Panic with Ignition 
on & off.    Panic 
with No time limit. 

Without Panic 
function. 

: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to 

confirm exit. 
 
3 / 30 seconds Delay Door Ajar Error Chirp: 
This feature controls the error chirp that is generated if the system is armed with the door trigger active. This 
useful in a vehicle that has a long dome light delays after the door has been closed. If the system is armed 
before the dome light has turned off, the security system will generate the door trigger error chirp. Use this 
feature to disable the door open error chirp. 
With Dome light turns on after ignition off: 
Some vehicles turn on the dome light when ignition key is turned off. After remote start, with alarm on, a 
false alarm may occur when the run time elapses and the dome light comes on. To prevent this from 
happing, program Alarm Feature I – 5 to “With Dome light turns on after ignition off (45 second door 
by-pass)”.  
 

1  Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.   
2  Push the Valet switch 4 times and hold it until two chirps with a long chirp is hearing then release the 

valet 
switch. You are now in the Alarm feature ‘II’ programming mode. 

3  Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.   
 

Press 
T

ransmitte

r 

Button 

One Chirp / LED 
one pulse 
Factory Default 
Setting 

Two Chirps / LED 
two pulses 
 

Three Chirps / LED 
three pulses 
 

Four Chirps / LED 
four pulses 
 

1 

 

0.8-second Door 
lock pulses. 

3.5-second Door 
lock pulse. 

Double pulse unlock